SPECIFICATIONS:
- Input Voltages:
12VDC
- 24, 36, 48, 72, 96,
120VDC also available
- Input Voltage
Range: -20% to +45% of Nominal
- Output
Waveform: True Sine wave < 4% THD
- Output
Voltages:
- 230V +/- 4%
Standard
- 110V +/- 4%
as Option
- Output
Frequency: 50/60Hz +/- 0.1%
- Crest Factor:
> 4
- Overload
Capacity:
- 300% 5
Seconds (all models)
- 120% 30
Minutes (110% 12Vmodels)
- Operating
Temperature: -10°C to +50°C
- Cooling:
Thermostatically Controlled Fan
- Power Factor:
All Conditions
- Peak
Efficiency: 90% to 94% Model Dependent
- DC
Connections: Heavy Duty Low Loss Battery Leads.
- AC
Connections: Screw Terminal Junction Box (1000-7000W
models), Single Power Outlet (500-1800W models)
- Standards:
AS2278, AS3000, AS3100, EN55014 & C-Tick
- Protection
Circuitry: Full Electronic Protection against Overload,
Overtemperature, Short Circuit, Battery Over & Undervoltage
DIMENSIONS:
- 500W - 600W
260 X 160 X 100mm
- 1000W - 1800W
330 X 296 X 150mm
- 2000W - 3500W
370 X 386 X 180mm
|
RANGE of
12VDC WALL-MOUNT
INVERTERS
-
Output power: 500Watt
-
Output power: 1000Watt
-
Output power: 1500Watt
-
Output power: 2000Watt
-
Application:
Wall-Mount
-
True Sine Wave
-
Power Factor: All
conditions
-
Input voltage:
12VDC
-
Output voltage: 230VAC +/- 4%
-
Output frequency: 50Hz +/-0.1%
OPTIONS:
- D - RCD fitted in place
of hardwire Junction Box on AC output
- G - MIL Spec Conformal
Coating applied to final assembly (all Models)
- K - Automatic Transfer
Switch 25Amp for 1000Watt - 1800Watt models
- KX - Automatic Transfer
Switch with ON delay timer and voltage sensing module 40Amp
for 2000Watt - 7000Watt models
- R - Ruggedisation for
high vibration environment
- V - AC Output voltage
e.g 100 - 120VAC
- Non Standard DC Input
Voltage e.g 32, 36,72, 96 120VAC
|
 |
