POWER ACCESSORIES

NEWMAR SITE POWER MONITOR

• SPM200

Web-enable and integrate intelligence to any site’s AC and DC power system for 24/7 monitoring, alarm condition notification, and data logging of vital electrical functions. All programmable, accessible, and managed via the Internet: TCIP or SNMP. View current conditions and log 30 day history of DC and AC power status at remote sites before dispatching personnel.

The Site Power Monitor is designed specifically for monitoring power supplies, rectifiers, batteries, converters, inverters, UPS, distribution panels, and AC power at communication sites, base stations, outdoor enclosures, and command vehicles via Ethernet or Wireless connection. The palm sized unit can be rack, DIN-rail, or wall mounted and is easily adapted to virtually any make of power system via nine sensor input ports which capture and stream critical data via the internet for analysis and logging of site history. Web page based programs are easily user configured for site parameters with up to 50 desired alarm conditions settings and multiple automatic notification options by e-mail, PDA, and mobile phone.

Sites without internet access can use the monitor solely as a data logging instrument that captures and retains a 30 day history file, ready for download to a lap top computer during maintenance visits for recording site history and analysis of component performance and failure conditions.

NEWMAR POWER FUNCTION MANAGER

• PFM400

The Power Function Manager (PFM-400) is a system integrating component which converts ordinary power supplies (Power Modules) into a fully integrated and multifunctional power system. The unit provides for control, monitoring, paralleling and protection of 12, 24 or 48VDC, positive negative or floating ground power sources.

The PFM has a heavy duty (400 amp) parallel tie point bus, digital output voltage and amperage monitoring, system and battery status lights, load distribution circuits, low voltage battery disconnect (ideal for systems with battery back-up) and summary alarm contacts, all combined in a compact, rack-mount housing which serves as a master DC power management and distribution center. A high amp rack-mount ground/return bus is provided.

The PFM may be used for integration, control, monitoring and protection of numerous different types of power sources, such as AC-DC rectifiers, regulated power supplies or DC-DC converters. Note: Installation of O-ring diodes recommended for paralleling of most power sources. O-ring diode output is standard on PM Series Power Modules.

Battery Disconnect Panels

(Power Plant Accessories)

• Provides over-current protection in high current battery wiring applications
• Provides a convenient means of disconnecting batteries from power plant during servicing
• High current single pole breaker is mounted into dedicated black finish panel
• Auxiliary contacts standard (form C)
• Adapts for 19" or 23" racks.
• Voltage Rating: 12, 24 or 48VDC
• Model Circuit Breaker Available Position Amperage
• BDP-1 1 50, 75, 100
• BDP-2 2 50, 75, 100
• Special order 125 to 400 amp panels available - contact GFS Power

Battery Trays

(Power Plant Accessories)

• Heavy gauge cold rolled steel trays to fit standard 19" racks with 17 3/4" inner dimensions.
• Ideal for holding up to four 100 amp-hour front terminal batteries.
• Inner dimensions: 17.25" Wide x 19.04" Deep.
• 350 lb. capacity.
• Black powder coat finish.
• Mounting hardware supplied.
• Weight 12 lbs.
• 23" trays also available in various depths.

Return Bus Bar

(Power Plant Accessories)

• 800 amp rated nickel-plated copper bus bar for use as heavy duty DC positive or negative connection point in rack installations
• Mounts to rear of rack; adaptable to 19" or 23" rack widths
• All mounting hardware including isolated stand-offs provided
• Multiple attachment holes in two sizes provided for single and dual hole lugs:
• 18 ea. @ .312" x .500"
• 6 ea. @ .437" round
• 4 ea. @ .281" round
• Bar is 2" high x 1/4" thick x 19 1/2" wide, 4 lbs.
• Projection depth from rear of rack: 7 1/2 inches

DC Quick Connect Wiring Kits

(Power Plant Accessories)

• Allow for quick installation and removal of rectifiers
• Designed specifically for use with NEWMAR 1KW PM Series Power Modules and Power Function Manager (see pages 6-7) in stacked rack configuration.
• Wiring harness is fitted with "Anderson" quick-connect and ring lug terminals; all wires tie- wrapped into proper position for quick and easy installation.
• Simplifies parallel wiring of up to 6 modules
• Facilitates "hot" change-out of modules without system shutdown
• Wire gauge 6 AWG

MODELS:

• QCK-3 for 2-3 Power Modules plus PFM and return bus bar; 3 lbs.
• QCK-6 for up to 6 Power Modules plus PFM and return bus bar; 4 lbs.

Rear Rack Covers

(Power Plant Accessories)

• Clear plastic panels attach to rear of racks to protect service personnel by preventing accidental contact with "live" terminals, etc., from top, sides and rear.
• Holes in rear panels allow for flow-through ventilation of fan-cooled components
• Model indicates height of cover in rack units and rack width in inches:
• RRC-3-19 3 RU, 19" rack
• RRC-7-19 7 RU, 19" rack
• RRC-3-23 3 RU, 23" rack
• RRC-7-23 7 RU, 23" rack
• May be installed at 14" or 17" rear depth
• Multiple covers may be stacked to accommodate system height
• All mounting hardware included
• Weight: 2 lbs.
• Special 2RU rear cover also available for DST panels - see Circuit Breaker DC Distribution Panels

PM Power Module

CHARGER FUNCTION BOARD for PM POWER MODULES (converts standard PM rectifier module into three stage battery charger with gel/lead-acid selector)

• Available for 12VDC, 24VDC and 48VDC models

PX Series 

(Electrical Installation Accessories)

PX SERIES

• Waterproof junction box with terminal strip for electronic connections in areas subject to spray, washdowns, etc.
• Rugged, non-corrosive polypropylene housing
• "Universal" cut-to-fit cable entries, diameter range: .14 -.81"
• Brass compression screw terminals
• Wire gauge: 16 AWG

             Model                 Terminals

• PX-1                     6 pair
• PX-2                     12 pair
• PX-3                     18 pair

BX Series 

(Electrical Installation Accessories)

BX SERIES

Splash proof junction box with terminal strip

• Rugged cast aluminum box and cover with enamel finish
• Multiple rubber grommet cable
• entries
• Brass compression screw terminals

             Model       Terminals      Wire Gauge

• BX-1            6 pair             16 AWG
• BX-2            12 pair           16 AWG
• BX-3            22 pair           14 AWG

(Electrical Installation Accessories)

CCX SERIES

• Create a 100%waterproof seal when routing cables through communication huts, cabinets, etc.
• Allow installation/removal with connector still attached
• Rugged weatherproof nylon with neoprene seal
• Entry hole predrilled

             Model        Cable Dia. Range       Max Conn. Dia.

• CCX-R            .47"-.59"                      1.57"
• CCX-S            .35"-.55"                       .83"
• CCX-T             .18"-.35"                       .83

DX Series

(Electrical Installation Accessories)

DX SERIES

• Similar to CCX Series except installer drills holes in seal to accommodate cable(s)
• Multiple cables may be routed through a single fitting

Connector Model        Drill-Thru Aperture         Max Diameter

• DX-2                          1.2"                                   1.2"
• DX-3                          1.65"                                 1.65"
• DX-5*                        2.0"                                   2.0"

*Aluminum Housing

Low Voltage Disconnect

(Installation Accessories)

Discharging batteries beyond a critical low voltage can damage the batteries and/or load, and require a longer recharge interval. A low voltage disconnect prevents this condition.

MODELS:

• LVD 12-30, LVD 12-75 (Neg. Ground)
• LVD 24-20, LVD 24-50 (Neg. Ground)
• LVD 48-30 (Pos. Ground)

(Installation Accessories)

(Installation Accessories)

Two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna. Die cast aluminum case

• Manual Model: CS-201

Operates on 12VDC, single pole, double throw. Permits remote selection of two antennas with a single radio.

• Remote Model: RCS

Microphone Clips 

(Installation Accessories)

• Model: Spring Clip

Temperature Compensation Sensors

TEMPERATURE COMPENSATION SENSORS

The TCS is an optional remote sensor for optimizing the voltage output of your Phase Three charger based on ambient or battery temperature.

It is designed for use only with the following models: PT-14, PT-20, PT-25, PT-40, PT-70, PT-24-8, PT-24-13, PT-24-20, PT-24-35, PT-24-40, as well as all Phase Three Modular Series models.

•  Model: TCS-12/24 shown

Fuses

GMT FUSES

 AMPERAGES: 1, 3, 5, 10 and 15Amp

Plug-in Circuit Breakers

PLUG-IN MID TRIP CIRCUIT BREAKERS

AMPERAGES: 5, 10, 15, 20, 30, 40, 50, 75 and 100Amp

Rear Terminal Cover Assembly Drawings

DST SERIES - REAR TERMINAL COVER ASSEMBLY

Designed to protect service personnel by preventing accidental contact with "live" terminals. Covers rear, top and sides of bus bars in DC Distribution Panels.