|
 Phase
Three Battery Chargers
Remote
Indicator Panel
DC
Energy Monitor
Temperature Compensation Sensor Manual |
PHASE THREE "SMART" BATTERY
CHARGING TECHNOLOGY
-
Output Voltage: 12VDC
and
24VDC
-
"Smart" circuitry provides
three stage charging - bulk, absorption and float
-
Wide model range covers
battery system ratings from 14 - 950 amp-hours
-
Gel-Cell / Flooded
Lead-acid / AGM battery type switch selects optimum charge /
float voltages
-
Multiple isolated output
banks; ammeter indicates total output current
-
Optional sensor adjusts
output voltage based on battery temperature (except PT-7)
-
Current limiting-prevents
damage from overloading
-
Charger status clearly
displayed with L.E.D. and / or audible indicators or
optional remote panel
-
Use as a power supply; can
power loads without a battery in line
-
Built to last - rugged
stainless steel case with drip shield and polyurethane
coated internal circuitry
-
Numerous Safety and EMC
Compliances
OPTIONAL ACCESSORIES
REMOTE INDICATOR PANEL
- Model: RP
- (Not available for all models)
- LED's indicate charger output
stage.
- Button allows manual reinitialization
of three stage charge cycle.
- Supplied with 25' cable and plug-in
connector.
- Panel dimensions: 3" H x 4.75" W
DC ENERGY MONITOR
- Model: DCE
- Reads
Volts, Amps, Amp Hours
TEMPERATURE COMPENSATION
SENSOR
- Model: TCS-12/24 shown
- - 5 mV per cell per ˚ C.
- Sensor supplied with 25' cable and
plug-in connector
|
 |
|
SPECIFICATIONS
-
Output Voltage:
12VDC
and 24VDC
-
Input
Voltage: 240VAC +/- 5%
-
Input
Frequency: 45 – 65 Hz
-
Operating Temperature: -10°C to +50°C
-
Battery Leads: 1m Long with 10mm Mounting Lugs
-
Battery Types: Flooded, Gel, AGM, Lead Calcium (Selectable)
-
Cooling: Thermostatically Controlled Fan
-
Standards: AS60335.2.29, EN55014, C-Tick
-
Protection circuitry: Overtemperature, Overload/Short
Circuit, Reverse Polarity
Dimensions: 260 mm x 160 mm x 100 mm |
5 STAGE INTELLIGENT CHARGERS
-
Selectable Battery Types
-
Temperature Compensation
-
Status Indicators
-
DC
Circuit Breaker / Battery Isolator Switch
-
No
Spark – Battery Connection
-
Full
Electronic Protection
-
5
Stage Intelligent Charging - Boost, Equalize,
Absorption, Float and Silent
-
Designed
& Manufactured in Australia
-
High
Efficiency Toroidal Transformer
-
Galvanically
Isolated
-
Rugged
Construction
OPTIONS:
-
R -
Ruggedisation
-
G -
Conformal Coating
|
 |
