ELA 250Watt
ELA 250Watt Precision
ELA 500Watt
ELA 1500Watt |
ELA SERIES - ELECTRONICALLY CONTROLLED DC
LOAD for WIDE RANGE LOAD VOLTAGE
The latest electronically controlled
DC loads from Zentro-Elektrik have an output power up to 250Watt or
500Watt. They are built in the latest MOS technology and at 0.35VDC to
160VDC they offer a wide range of load voltage. As a result, they can be
used in a variety of applications, anything from fuel cells to uses on
test benches. Wherever DC loads are used as stand-alone devices or
integrated into a system application via interface, the ELA250 / 505
series, besides providing constant I-Mode, G-Mode or Master Slave Mode
and externally programmable I-, P- or G- constant mode, also offers a
variety of intelligent functions such as Load ON/OFF, RCP with an
additional 0.15VDC voltage, Local-Lockout, U-, I-Monitor output; Load
ON-relay on Power Up and much more. An IEEE488.2 (GPIB) / RS232
interface with LabView driver, a USB interface or, on request, an
external CAN-Open interface are available as options. |
|
|
EL 3000Watt 4500Watt and
6000Watt |
POWER 3KWATT, 4.5KWATT and 6KWATT
- Cooled by int. fans
- Constant I-Mode, U-Mode,
- P-Mode or G-Mode
- All Modes ext. programmable
- Nominal value indication and offline setting
of all Modes
- Auto change to true values
- Overload possible for a short time
- Stand-alone use and intended for 19" rack
OPTIONS A.O.:
- Installed IEEE488.2 (GPIB) / RS232* / USB*
interface with Lab-View Driver (Series INT2E) Installed USB
Interface with driver software
- External CAN Open Interface (on request)
- *selectable RS232 or USB
|
 |
|
ELS
Series - max. 80kWatt |
POWER MAX. 80KWATT
- Cooled by air or liquid
- Constant I- Mode, U- Mode,
- P- Mode, or G- Mode,
- All Modes I, U, P and G- Mode
- ext. programmable
- Nominal value indication and offline setting
of all Modes
- Auto change to true values
- 19" rack cabinet
OPTIONS A.O.:
- Installed IEEE488.2 (GPIB) / RS232* / USB*
interface with Lab-View Driver (Series INT2E) Installed USB
Interface with driver software
- External CAN Open Interface (on request)
- *selectable RS232 or USB
|
 |
